Enables Automate DC motors to operate wirelessly and without the constraints of traditional battery wands with disposable batteries.

• Replaces battery wand with replaceable batteries
• Provides up to 500 up/down cycles on a single charge (depends on shade size & fabric weight)
• Compatible with Automate Cord Lift, Venetian Tilt, 18, 25 & 28mm tubular DC motors
• Small profile allows for optimal placement in window pocket
• Battery pack fully recharges in ~ 6 hours
• Battery health status reported in Automate Pulse App
• Pairs with optional solar panel for autonomous re-charging

If you have an instance whereby not all motors are responding or responding intermittently, the ARC repeater will double the range you currently get.

• Increases the range up to 40m/131f
• perfect for double story home or multi level buildings
• Easy to use Plug & Play
• No pairing or configuration
• Maximum 2 Repeaters per system / network
• Bi-directional (receives motor feedback)

Higher 15V output allows for greater cable lengths from motor to power panel, freeing up routing options within an installation. Removes the need for multiple individual power adaptors for each DC motor in an installation, combining each power source into a single location. Channels may also be wired in parallel to provide additional power to larger motors.

• Capacity for up to 18 ARC DC motors (18mm, 25mm, and 28mm motors)
• Ability to parallel connect motor supplies for higher current motors (35mm
  and 45mm motors)
• LED status indication for checking whether power is being applied to panel
• LED status indication for each individual motor supply

• Renewable power
• Plug ‘n’ perform power for wirefree motors
• Multiple mounting points
• Optimal performance in low light circumstances
• Crystal technology to increase solar ray absorption

Our AUTOMATE ARC Relay Module acts as an interface between smart systems & Automate ARC motors. Offering wireless control and features up, down & stop contact inputs.

• Interface between third party smart home systems and ARC motors
• Three contact inputs – Up, Down & Stop
• Wireless control of ARC motors
• Roller mode and Step mode for Venetian motors
• Group Motor Control
• 12V or 24V power source compatible

• Charges latest Zero Li-ion 5V Motor range
• Features a 2 Amp USB power supply
• 4m Micro USB cable supplied.

• Charges original Li-ion 12V Motor range
• Requires 6 hours initial charge time
• 1.2m cord
• Built-in battery charge indicator

• Used with Li-Ion 12V motors
• Comes in three convenient sizes; 155mm, 1.2m & 2.4m
• Extension cords provide additional length for the charge cable to reach power points.

• Used with Zero Li-Ion 5V motors
• Comes in three convenient sizes; 155mm, 1.2m & 2.4m
• Extension cords provide additional length for the charge cable to reach power points.

• 100W switch mode power supply
• Laptop type power supply
• Includes AU plug

Easily charge your Automate shades with the 5V Magnetic Charger. Simply snap the charger in place and pull off when fully charged.